Industries

More than 300 million tons of plastic is produced every year, and much of it ends up causing environmental problems. In response to these challenges, there are widespread global efforts to increase recycling capacity and innovate for more efficient and effective recycling solutions. Vacuum plays a critical role in achieving these improvements.

The plant recorded another win in its long list of accomplishments when it replaced aging multistage blowers with high-speed integrally geared blowers in 2020. The new blowers with Variable Frequency Drive (VFD) control are credited with a 40% reduction in energy consumption for aeration. This results in an annual savings of $35,000. The blower upgrade, which also helps protect the safety of employees, is expected to deliver a payback of less than five years.

The 2022 International Production & Processing Expo (IPPE), was held January 25-27, 2022 in Atlanta with more than 500,000 square feet of exhibit space and 1,140-plus exhibitors. Attendee numbers had not been released when this was written. Sponsored by the U.S. Poultry & Egg Association, American Feed Industry Association and the North American Meat Institute, IPPE is the world's largest annual poultry, meat and animal food industry event of its kind. 

Most control systems use Proportional-Integral-Derivative (PID) algorithms for controlling DO, basin air flow distribution, and blower pressure or flow. These algorithms are prone to hunting - the cyclic fluctuation of the controlled variable. Fluctuations that oscillate the DO several mg/L above and below the target DO concentration are common.

By using state-of-the-art vacuum technology for degassing mineral water, it has been possible to save an average of 3,000 cubic meters of water per filling plant per year. The solution was to replace the existing liquid ring vacuum pumps with MINK claw vacuum pumps from Busch Vacuum Solutions.

This article aims to discuss the various technologies of equipment that could be presented to a wastewater operator faced with a temporary need for blower air and to help the operator understand the impact (both monetarily through a “Total Cost of Rental” approach and environmentally) of their decisions.

In an ongoing project to improve processes whenever and wherever it can, a global manufacturer of private label retail, food service and specialty brand teas, purchased an extension conveyor system to improve efficiency and ergonomics. Prior to implementing the extension conveyor, a vacuum conveyor system transferred raw materials into portable silos that workers rolled from one production machine to the next.

The food industries can have many messy processes, whether it is poultry evisceration, deboned waste conveying, bottling, or sugar cake filtration. Liquid ring vacuum pumps (LRVP’s) are often utilized as the backbone of these processes because they can handle the soft solids, debris, and particles that can easily get sucked into the vacuum pump. So how does a LRVP work, why does it work in these processes, and how to make sure they keep working?

A small site located within a floodplain, prone to erosion, and currently occupied by an existing in-service wastewater treatment facility is not at the top of any engineer’s list for a desirable site to expand a wastewater treatment plant or reclamation facility. However, these challenges created opportunity for specialized solutions during the design of the facility expansion; in particular, in designing the aeration and digester blower system.

Ever since it was commissioned in 1974, the Echallens wastewater treatment plant in the Swiss canton of Vaud has been generating power from the recovery of biogas. In May 2020, two old oil-lubricated piston compressors used to mix the sludge in the digester were replaced by one MINK claw compressor from Busch Vacuum Solutions. This enabled the amount of power required for this process to be reduced by up to 40 percent. For the director of the treatment plant, this means he needs less energy to produce energy.